ARL 200S Elevator Controller Units
FEATURES Can be used at any command type up to 16 floors. All system parameters can be adjusted by the user via buttons and LCD on the card. Can be used in group operation up to two elevators. All panels in the group are the same and no extra panel is needed. Only to do is set each panel as A, B, and C in the program menu. Compatible with VVVF drivers. Only two cables are needed for group communication. Floor detection is carried out by a counter system. Only 3 magnetic switches for one speed and 4 for two speed systems including limit switches are used for any number of floors. An error code with its explanation is displayed on the LCD at an abnormal condition.
(Ex. H1: Door cannot be locked) Under normal conditions, the lift can be monitored by messages on the LCD. (ARL 200S Waits for calls, high speed, low speed, inspection) Turkish, English, Dutch, Romanian, French-language menu options. Each floor can be named by an alphanumeric character. (L,P,E,F,H,b,o,0, 1,2,3…..) 7-segment and signalization outputs are short-circuit protected. In a short circuit case, the concerned output is shut down until the problem is removed and a message stating which output is short-circuit is displayed on LCD. ( D segment short circuit) Only 15 cables are enough for a system to work by using a serial car connection (FX_SERI) which reduces labor and cable costs. No extra switch is needed at high-speed lifts (1,6 m/sec) for the early slowdown. Designed according to European lift standard EN-81.